全國熱線服務:
新聞資訊 Top label
- Fiberglass Composite Air Ducts: Revolutionizing Modern HVAC Systems
- The Complete Guide to Honed Tubes: Precision Engineering for Modern Industry
- Digital pH Sensors: Revolutionizing Industrial Process Control and Environmental Monitoring
- Precision Gas Flow Meters And Mass Flow Controllers: The Ultimate Guide To Technology Selection, Calibration, And Application Optimization For Semiconductor, Pharmaceutical, And Research Processes
- Laser Cutting Technology: Working Principle, Types & Application Guide
- Casting Vs Forging Vs CNC Machining — Decision Framework For Custom Components
What are the causes of overheating during piston rod processing?
What are the causes of overheating during piston rod processing?
1. The piston rod and stuffing box are deflected during assembly, causing local friction with each other, and should be adjusted in time.
2. The holding spring of the sealing ring is too tight and the friction is large, so it should be adjusted appropriately.
3. The axial clearance of the sealing ring is too small, and the axial clearance should be adjusted according to the regulations.
4. The oil supply is insufficient and the oil supply should be increased appropriately.
5. The piston rod and sealing ring have poor running-in, and the running-in should be strengthened during grinding.
6. Impurities mixed in gas and oil should be cleaned and kept clean.
Please indicate the source for reprinting:http://m.hkgz.cn
1. The piston rod and stuffing box are deflected during assembly, causing local friction with each other, and should be adjusted in time.
2. The holding spring of the sealing ring is too tight and the friction is large, so it should be adjusted appropriately.
3. The axial clearance of the sealing ring is too small, and the axial clearance should be adjusted according to the regulations.
4. The oil supply is insufficient and the oil supply should be increased appropriately.
5. The piston rod and sealing ring have poor running-in, and the running-in should be strengthened during grinding.
6. Impurities mixed in gas and oil should be cleaned and kept clean.
Please indicate the source for reprinting:http://m.hkgz.cn